All our products are REACH-compliant, free of PFOS/PFOA, and friendly to the environment and human health.

We are an R&D and production company. We develop and produce our coatings in our facilities.

We produce our coatings using sol-gel reaction mechanisms.

We use fluoro-siloxanes for our repellent coatings

Some of our products were tested for migration and successfully passed the tests. Others can be tested for necessary cases.

Yes, our products can be applied with several application methods. For example, our textile products can be applied by spraying or padding, and hard and smooth surface products can be applied via high-pressure spraying or by hand. You can contact the Industrial Sales Department for further information.

All our coatings can be cured at room temperature in between 12-48 hours, but it can be accelerated via heat treatment depending on the heat resistance of the surface.

It is the necessary time for the applied surface to be handled safely so as not to damage the coating. It takes 4-6 hours at room temperature, but it can be accelerated via heat treatment.

Since most of our products are repellent, they might reduce the adherence of the paint.

Yes, you can. Contact the Industrial Sales Department for the terms and conditions, please.

• You will be announced as one of our industrial partners with your contact information.
• You will buy the products at a cheaper price.
• We will support you in marketing, existing and new product development, and technical guidance.

For hard and smooth surfaces, HVLP spray guns with a 0.8 mm nozzle diameter are suitable. For absorbent surfaces, any spray gun with higher nozzle diameters that can apply homogeneously can be preferred.

The surface to be coated should be clean, dry, and cool. For non-absorbent surfaces, Nasiol CLEAN, our alcohol-based multi-purpose surface cleaner, can be used. Industrial surface cleaning baths and drying cabinets can also be used.

For outdoor applications, we generally recommend that morning and evening hours be preferred. This is because the application surface may be hot, and it might complicate the application and cause a decrease in performance.

This period is different for each product, but if you keep the bottle tightly closed during and after use, you can continue to use our products for months.

Yes. We are an R&D company, and we are able to develop products according to demand. For this, we prepare a product development contract, and when both parties agree on the terms, we mutually sign the contract and start development work for a certain fee.

The main differences between them are pencil hardness, durability, repellency degree, and dry film thickness. You can find the detailed comparison table in our product catalog.

• Nasiol T is an alcohol-based product recommended for all kinds of textiles except natural fibers like cotton and blends of them.
• Nasiol T1 is the economical and lower-quality version of Nasiol T.
• Nasiol T-WB is a water-based product, recommended for all kinds of textiles, including natural fibers like cotton and blends of them.
• Nasiol T-PLUS is an alcohol-based product recommended for all kinds of textiles, including natural fibers like cotton and blends of them. Apart from these, T-PLUS and T-WB are more repellent compared to T and T1, and among all, T-WB is the most durable one.

• Nasiol W is an alcohol-based product that is durable for up to 1 year.
• Nasiol W-WB is a water-based product that is durable for up to 5 years. Apart from these, the repellency level of W-WB is higher than that of W, and it is suitable for a wider range of wood.

C1 is an economical version of the C. The repellency and durability of C are higher than C1.

• Nasiol Z is an alcohol-based product that is durable for up to 2 years.
• Nasiol Z-WB is a water-based product that is durable for up to 3 years. Apart from these, the repellency level of Z-WB is higher than Z.

LC12 is recommended for genuine and artificial leathers, but for suede and nubuck, we recommend the T series instead of LC12.

Except M07 and FCC, one layer is sufficient for optimum properties.

You can use an oven or an infrared lamp.

Nasiol application accessories were selected after long tests among many different alternatives. For optimal performance, we recommend using the original Nasiol application accessories.

This varies according to the surface type and the coating suitable for it. We have coatings that can cover up to 250 square meters with 1 liter. In our catalog and technical data sheets, square meter consumption is given separately for each product.

Apart from SHBC, the dry film thickness of our coatings is between 75-1100 nm. The dry film thickness of SHBC can reach up to 10 microns.